↳ OWNER’S GUIDE · 02
A wooden crate that doubles as a table — furniture-grade Baltic birch plywood, hand-stained, built in the USA. Everything you need to size it, build it, and look after it.
Measure your dog’s length and height, then add four inches. Match that against the maximums below. When you’re between sizes, go up — the extra room is always more comfortable.
26″ L × 19″ W × 23″ H
Exterior
Fits dogs up to about 22″ long and 18.5″ tall.
39.5″ L × 30″ W × 34″ H
Exterior
Fits dogs up to 35.5″ long and 30″ tall.
Send us your dog’s breed, weight, length, and height and we’ll tell you which size to get — including when the answer is neither.
Everything you need is in the box. Work on a soft surface or the carton itself so the finish stays unmarked.
Lay out every panel and the hardware bag. Check the pieces against the parts list before you start — if anything is missing, stop and email us.
Join the side panels to the base first, hand-tightening only. Leave everything slightly loose until the whole frame is together.
Set the top panel in place and align the edges flush before tightening anything down.
Work around the frame in stages rather than fully tightening one corner at a time. This keeps the piece square.
Attach the door last and check the swing. Adjust the hinge screws if it doesn’t sit flush.